Table of Contents
Advertisement
4.3 Extension Line
3. Select the Extension Line parameters to copy in "Copy Item" field.
• Only parameters which are available to copy are shown in "Copy Item" field.
This depends on the attribute of the copy source Extension Line.
• Items marked with " " are copied.
4. Point to the "Select All" button in the "Destination Extension Line" field and click.
• All displayed Extension Line Nos. will be highlighted.
• You can also specify one or several Extension Lines as the copy destination by clicking
it (them) directly.
5. Point to the "Execute" button and click.
• "Are you sure?" is displayed.
6. Point to "Yes (Y)" button and click.
• "Copying" is displayed while the source data is being copied to the destination.
• Parameters of the destination Extension Lines are immediately effective when copying
is finished.
Parameter
Default
Value Range
Description/Function
Reference
148
Card No.
—
XXX : YYY [XXX : Card No. (101-314), YYY : Card Type]
Specifies the physical number of the extension card and its type,
which you are going to programme.
• 1.2 Slot Assignment (P/G)
Line
Advertisement
Table of Contents
