Table of Contents
Advertisement
1.2 Slot Assignment
Parameter
Default
Value Range
Description/Function
Reference
8
Card Type
Blank
Specifies the type of service card inserted in the free slots in the
basic and expansion shelves.
<Selection>
None: Not assigned.
BRI: ISDN Basic Rate Access Interface card
DHLC: Digital Hybrid Line Circuit card
DISA: Direct Inward System Access card
DLC: Digital Proprietary Line Circuit card
DPH: Doorphone Circuit card
E1: E1 Digital Trunk card
E&M: E&M card (TIE Line card)
ELCOT: Enhanced Loop Start Central Office Trunk card
ERMT: Enhanced Remote Circuit card
ESLC: Enlarged Single Line Telephone Circuit with Message
Waiting card
PRI30: ISDN Primary Rate Access Interface card
Notes
• To change the current Card Type to a new one, delete the
current setting first by selecting "None" and then assign a
new Card Type.
• CPU - Slot No.13 of the Basic Shelf is fixed to CPU (Central
Processing Unit) card.
• TSW- Slot No.14 of the Basic Shelf is fixed to TSW (T-
Switch) card.
• Card Properties
"Card Properties" screen lists and lets you customise the
operating characteristics associated with the following
optional cards.
Extension Cards: DHLC, DLC, ESLC
Trunk Cards: E&M, E1, ELCOT, BRI, PRI30
Resource Cards: ERMT, DISA
• Editing Card Properties Parameters
You can edit Card Properties parameters according to your
needs. To go to "Card Properties" screen, click [Card Type]
button of the target card on this screen. Then click
[Properties] button.
• Help File
You can get information on Card Properties Parameters by
clicking [Help] button on this screen.
• 1.4 Service Cards Description (I/M)
Configuration
Advertisement
Table of Contents
