Panasonic KX-TD500CE Programming Manual page 214

5.14 Charge
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
214
[Charge Verification ID Code] Tenant 1-8
1234
4-7 digits consisting of 0-9
Specifies the ID code required for the charge management.
When "Tenant Service" is employed, the password for each tenant
(Tenant 1 to 8) can be assigned respectively.
• 1.3 System Features (F/G)
– Tenant Service
• 4.2 Charge Fee Management (Station Programming) (U/M)
• 2.2 Tenant (P/G)
Rate
1.0
0.00001-999999
Specifies the charge rate per meter.
Notes
• The telephone charge is calculated by multiplying the value
of "Rate" and the meter (the number of Pay Tones sent from
the Central Office).
• Telephone charge is shown on a display PT in a max. 8 digits
(including the '.' [decimal point] ) format.
• 4.2 Charge Fee Management (Station Programming) (U/M)
Currency
$: [SP], [NL], [JT], DM: [G]
Up to 2 characters consisting of 0-9, A-Z, a-z or the following
marks: ! # $ % ( ) + , - / : ; < = > ? @ &.
Specifies the currency appropriate to your country.
None
Features