Table of Contents
Advertisement
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
2.8.4 System Option 4/4
Used to assign system option parameters (No.31 – No.49).
System
28. Trunk hunting mode
Forced
1.
Forced
2.
Loop Detection
Specifies the trunk hunting mode.
1.
Forced
The system seizes a trunk line whether or not loop current is
detected from the local CO.
2.
Loop Detection
The system seizes a trunk line after detecting loop current from
the local CO.
• 3.2 Trunk Group (P/G)
30. Net CODEC
A-law
1.
-law
2.
A-law
Specifies the type of PCM (Pulse Code Modulation) conversion
mode compatible with the Digital Network to which the system is
connected.
Note
• The change of this parameter is activated after resetting the
system.
None
2.8 System Option
91
Advertisement
Table of Contents
