Table of Contents
Advertisement
Error Code
E4022
Cannot assign PDN key as Prime Line - CO.
Please assign key number except for PDN key when the outgoing or incoming
preferred line is set to "Prime Line - CO."
E4023
Illegal trunk group number.
Please assign the trunk group number (1~48) on Group - CO key.
E4024
DN or FDN must be entered to assign the type of key.
You must enter the DN or FDN when you assign key type "DSS," "Phantom," "SDN,"
"VTR," "2WAY-REC" and "2WAY-TRN." Each key needs following directory number
as DN or FDN:
- DSS
Extension directory number which is in existence.
- Phantom
Floating directory number which is registered in "5-2 Phantom Extension" screen.
- SDN
Primary directory number (PDN) of the DN mode extension.
- VTR, 2WAY-REC / TRN
Extension directory number which is assigned as VPS.
E4025
PHANTOM key duplicated.
Two phantom keys cannot have the same phantom FDN.
E4026
Please enter CO key number assigned to S-CO, G-CO, L-CO or SDN key.
The CO key number which is assigned to Single-CO, Group-CO, Loop-CO or SDN
key should be entered when "Prime Line - CO" is specified in [Preferred Line]
Outgoing / Incoming" programming.
E4027
Doorphone destination duplicated.
Doorphone destinations (extensions) must be unique for Day mode settings and Night
mode settings. However, an extension used for Day can be used for Night.
E4028
Converted digits exceed the limit.
Total number of converted digits should be less than 16 digits. Please change 'Digits to
delete,' and / or 'Number to be added.'
E5001
Assign both 'name' and 'number' for Caller ID.
Cannot assign just the name for Caller ID.
E5002
Cannot use more than seven % characters.
There can be a maximum of seven % characters in an absent message.
E5003
User code format error.
Please assign the DISA / TIE user code of 4~10 digits consisting of 0~9.
E5004
User code duplicated.
Each code in the DISA / TIE User Code must have a unique number.
E5005
Cannot set 'RET' command at the head.
Please set the command except for "RET" at the head of UCD Time Table.
Programming Error Messages
Error Message
Description
11.1 Error Messages (EXXXX)
277
Advertisement
Table of Contents
