Table of Contents
Advertisement
3.2 Trunk Group
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
106
Line Hunting Order
Normal
1.
Normal
2.
Reverse
3.
Sequential
Specifies the hunting sequence of idle lines on a trunk group basis.
1.
Normal
The system connects the user to an idle trunk line with the
lowest physical number.
2.
Reverse
The system connects the user to an idle trunk line with the
highest physical number.
3.
Sequential
To avoid repeated use of the same trunk line, rotation is
performed in numerical order (from the lowest to the highest
trunk port physical number.) Busy lines are skipped, of course.
• 2.8 System Option (P/G)
Disconnecting Time
1.5 s: [SP], [NL], [JT], 2.0 s: [G]
1.
0.5 s
2.
1.5 s
3.
2.0 s
4.
4.0 s
5.
12.0 s
Specifies the maximum time in seconds the system is to wait after
releasing the trunk line before getting it again.
Note
• This allows the Central Office an opportunity to release its
resources before another trunk call is placed from the PBX.
None
Group
Advertisement
Table of Contents
