Table of Contents
Advertisement
4
.
1
3
.
2
I
P
v
6
L
A
N
S
4
.
1
3
.
2
I
P
v
6
L
A
N
S
This page defines the IPv6 connection types for LAN interface. Possible types contain
DHCPv6 Server and RADVD. Each type requires different parameter settings.
Available settings are explained as follows:
Item
LAN IPv6 Configuration
RADVD (Stateless)
DHCPv6 (Stateful)
e
t
u
p
e
t
u
p
Description
IPv6 Address - Type static IPv6 address for LAN.
IPv6 Link local Address - It is used for communicating
with neighbouring nodes on the same link. It is defined by
the address prefix fe80::/10. You don't need to setup
Link-Local address manually for it is generated
automatically according to your MAC Address.
The router advertisement daemon (radvd) sends Router
Advertisement messages, specified by RFC 2461, to a local
Ethernet LAN periodically and when requested by a node
sending a Router Solicitation message. These messages are
required for IPv6 stateless auto-configuration.
Enable - Check this box to enable RADVD function for
IPv6 connection.
Advertisement lifetime - The lifetime associated with the
default router in units of seconds. It's used to control the
lifetime of the prefix. The maximum value corresponds to
18.2 hours. A lifetime of 0 indicates that the router is not a
default router and should not appear on the default router
list.
IPv6 Start Address/IPv6 End Address - Type the start
and end address for IPv6 server.
218
Vigor1000 Series User's Guide
Advertisement
Table of Contents
