Table of Contents
Advertisement
• Where the AutoCAD executable file, ACAD.EXE is located.
Generally, this file is in the default AutoCAD directory mentioned
above. In the case of AutoCAD R13, it will reside in the
C:\R13\Win or C:\R13\DOS directories.
• Where to install the ENCAD ADI driver. The installation program
creates an ENCAD directory under the DRV directory such as
\R13\WIN\DRV\ENCAD and installs the driver in this directory.
• Where AutoCAD's ".DCL" files are stored. These files are dialog
controls for AutoCAD commands and drivers. The ENCAD
".DCL" file needs to be stored with these files. (AutoCAD 12 and
13 Windows only) Where the ACAD.INI file is stored.
This file sets the path to the driver location. The ENCAD ADI
driver installation will modify this file to point to the ENCAD
directory. The original file will be saved to a file called
ACADINI.000. If the original file needs to be restored, simply
delete the modified ACAD.INI file and change the ACADINI.000
file name back to ACAD.INI. (AutoCAD 12 and 13 DOS only)
Typically, the name of the batch file that starts AutoCAD is
ACADR12.BAT or ACADR13.BAT and is stored in the root: C:\ or
in the AutoCAD directory: C:\ACAD or C:\R13\DOS. The original
file will be saved to a file called ACADR12.000 or ACADR13.000
and can be restored if necessary by deleting the modified
ACADR*.bat and renaming the ACADR*.000 to ACADR*.BAT.
• The directory where the ACADR*.LSP file is stored. This file
loads certain Autolisp routines and other functions when
AutoCAD is launched.
The ENCAD ADI driver installation will modify this file so that the
ENCAD ADI driver will be automatically loaded with each session
of AutoCAD.
5
After successfully installing the ENCAD ADI Driver, start AutoCAD.
Details on configuring the driver are included on the System CD-ROM.
CADJET
®
3D Quick Start Guide
41
Advertisement
Table of Contents
