ENCAD CADJET 3D Quick Start Manual page 33

10 Close the XAdmin window and click on the YES button when asked
if you want to save the file.
At this point, if you are setting up a computer/printer standalone
configuration, you can leave the connections as they are and can
start WEBXAdmin to finish configuring the print server. If you are
connecting your printer to a larger network, disconnect the
crossover cable from the print server and the computer. Connect
the standard network connections to the computer and the print
server as directed by your network administrator.
Á
To configure the print server using WEBXAdmin
1 Start your web browser on your computer. Internet Explorer must
be at least version 5.0.
2 Enter the print server IP address, that you assigned using
XAdmin32, into the URL Address field (192.0.0.194). The browser
window should appear similar to the following:
http://192.0.0.194/
CADJET ® 3D Quick Start Guide
33