Table of Contents
Advertisement
®
CADJET
3D Quick Start Guide
8
In the Plotter Model dialog, click on ENCAD in the left list box (under
manufacturers) and then select your printer from the right list box
(under models). Click NEXT.
9
In the Import PCP or PC2 dialog, select IMPORT FILE only if you
have PCP or PC2 files from AutoCAD 13 or 14 to import. (If you do
want to import files at this time, you will need the correct file names
for entering here.) Otherwise, click NEXT.
10 In the Ports dialog, select LPT1 and click NEXT. (If your printer is
networked, select the networked printer.)
11
In the Plotter Name dialog, enter a new name here for your plotter or
use the default name and click NEXT. Make sure you read the note
under the plotter name field.
12 Click Finish. You should see your plotter appear in the list of plotters.
13
To configure your driver, double click on your plotter in the list.
ADI driver
The ENCAD ADI driver lets you print to ENCAD printers from AutoCAD. Use
it to print files created with AutoCAD DOS and Windows Releases 12, 13, and
14.
Á
To install the ADI driver:
1
Insert the System CD into the CD drive on your computer.
2
Follow the onscreen instructions to locate the driver and launch the
installation program.
3
The program will display several opening screens.
4
Answer the questions about the AutoCAD installation.
• The directory where AutoCAD is installed. This refers to the base
or root AutoCAD directory.
• For AutoCAD release 12 DOS, the default directory name will be
C:\ACAD.
• For AutoCAD release 13 DOS or Windows, it will be C:\R13.
• For AutoCAD release 14 it will be C:\Program Files\AutoCAD R14.
40
Advertisement
Table of Contents
