ENCAD CADJET 3D Quick Start Manual page 31

3 Double click on the Xadmin32 icon on your desktop or use the
Windows Start button to select Xadmin32 in the XCD folder in the
list of Programs. When the program starts, you will see a dialog
box similar to the following:
4 From the Devices menu at the top of the XAdmin32 window, select
Setup Unconfigured Devices. This will open a dialog box similar
to the following:
NOTE: The MAC address should match the address printed on the
print server label.
CADJET ® 3D Quick Start Guide
31