Table of Contents
Advertisement
2
Choose Local Printer (LPT1).
3
Choose ENCAD under Manufacturers and CJ3D under models.
Keep Existing Driver if prompted.
4
Choose the LPT1 port.
5
Leave the printer name as it comes up – "CJ3D". Do not set it as
your default printer.
6
Do not print a test page at this time.
7
Select the new printer, right click and select Properties, then the
Details tab.
8
Click on Add Port and fill in the Network Bullet. Fill in the print server
address on the TCP/IP address line in this format:
\\192.0.0.194\binary_p1
Click OK and then click Apply.
9
Select the General tab and click on Print Test Page. Wait a few
minutes and the Windows banner page will print. This verifies that
the driver works, the network address is correct and a printer "port"
has been established.
10 Exit the properties window.
For Windows 2000 systems:
1
Insert the CADJET 3D System CD #1 and follow the onscreen
instructions to install the Windows driver.
2
Choose My Computer.
3
Choose LPT1.
4
Choose ENCAD under Manufacturers: and CADJET3D under
Printers: Keep Existing Driver if prompted.
5
Leave the printer name as it comes up – "CJ3D". Do not set it as
your default printer.
6
Choose NOT SHARED. Do not print a test page at this time.
7
Select the new printer, right click and select Properties. Click on
the Ports tab and select Add Port.
8
From the drop down menu, choose Standard TCP/IP Port, then
click on New Port. The TCP/IP Port Wizard displays.
CADJET
®
3D Quick Start Guide
35
Advertisement
Table of Contents
