Lighting Systems; Baitwell Light - Pro-Line Boats 2009 Grand Sport 29 Owner's Manual

Hide thumbs Also See for 2009 Grand Sport 29:

Owner's manual (31 pages)

Owner's manual (61 pages)

Table Of Contents

Table of Contents

Fish Box Pump - This switch operates the fish box macerator pump that allows you to drain the water and

debris from the aft fish boxes. The macerator pump, which is connected to the collector box (located in the

bilge), allows you to pump all the water, ice and scales out of the boxes by grinding up the debris and

discharging it overboard. To activate the pump manually, depress the switch to the up or forward position.

This action will drain the fish boxes of water and/or debris, transport it into the collector box/holding tank and

then to the macerator pump to be macerated and/or discharged overboard.

When not in use, the switch should be left in the off or down position. Even though your Pro-Line is equipped

with a true gutter system, sometimes water will accumulate in the fish boxes. As long as there is power to the

fish box macerator pump, the automatic float switches located in the holding tank will activate the pump and

automatically discharge the water overboard.

Baitwell Pump - The baitwell pump is located in the bilge area and is mounted on a seacock (ball valve). For

the baitwell pump to operate properly you need to make sure the seacock is in the open position. The

seacock is wide open when the yellow seacock lever is vertical. When the yellow seacock lever is horizontal,

the seacock is closed.

The underside of the seacock thru-hull is equipped with a scoop to allow the water to be picked up even

when the boat is on plane. When the boat is not in the water or the baitwell pump is not going to be used for

an extended period of time, the seacock valve should be in the closed position.

To activate the pump, depress the switch to the up or forward position. To turn the pump off after the baitwell

tub is full, depress switch to the down or aft position.

Washdown Pump - To activate the pump, which is located in the bilge, depress the switch to the up or

forward position. The washdown pump draws its water from the same seacock as the baitwell pump. To turn

the pump off, depress the switch in the down position. Keep the washdown switch in the off position if the

pump is not going to be used soon.

Fresh Water – The fresh water switch directs power to the fresh water pump. Depress the fresh water switch

to the forward position to activate the fresh water pump. Then, go to any one of the 3 fresh water stations

and turn on the faucet. If the fresh water system is not going to be in use, move the switch to the down

position to turn the pump off.

Baitwell Light - To activate the baitwell light, depress the switch to the up or forward position. This will

activate the LED (light emitting diode) light inside your baitwell tub. It is a soft white light that will keep your

bait moving and lively. It will also help you locate your bait on those early morning or late night fishing trips.

To turn the light off, simply depress the switch to the down or aft position.

Cockpit Lights – A 3-position switch operates both the cockpit and bilge lights. The cockpit lights are small

circular lights located at the console and/or around the cockpit. To activate the cockpit lights, depress the

switch to the up or forward position. Pressing the switch to the aft position activates the bilge light. Move the

switch to the center position to turn off the lights.

Note: This switch will not activate both types of lights at the same time.

Head Light – The head light switch provides power to the round light located in the head area. To activate

the head light, depress the switch to the up or forward position. Then press the on/off switch located on the

base of the light to turn on the light. Keep the cabin light switch in the off position if the light is not going to be

used soon.