Troubleshooting - Kipor Sinemaster IG200 Operation Manual

Control panel
EU type
SMART-THROTTLE SWITCH
OVERLOAD INDICATOR LIGHT
DC RECEPTACLE
DC CIRCUIT PROTECTOR
AC RECEPTACLE
OUTPUT INDICATOR LIGHT
GROUND TERMINAL
LOW OIL ALARM
INDICATOR LIGHT

11. TROUBLESHOOTING

When the engine will not start:
NO
Is there fuel in the tank?
YES
NO
Is the engine switch on?
YES
NO
Is the enough oil in the engine?
YES
Is there a spark from Replace the
NO
the spark plug? spark plug.
To check:
WARNING
1) Remove the spark plug cap and clean
Be sure there is no spilled
any dirt from around the spark plug.
fuel around the spark plug.
2) Remove the spark plug and install the
spark plug in the plug cap.
Spilled fuel may ignite.
3) Set the plug side electrode on the cylinder
head to ground.
4) Pull the recoil starter, sparks should jump
across the gap.
If the engine still does not
start, take the generator to an
authorized dealer.
-
Refuel the fuel tank
Turn the engine switch on.
Add the recommended oil.
Still no
Take the generator to an
spark authorized dealer.
-