Kipor Sinemaster IG200 Operation Manual page 16

3. Check the air cleaner.
Check the air cleaner element to be sure it is clean and in good condition.
Loosen the cover screw and remove the left side maintenance cover.
Press the latch tab on the top of the air cleaner body, remove the air cleaner cover, check
the element. Clean or replace the element if necessary.
CAUTION
Never run the engine without the air cleaner. Rapid engine wear will result
from contaminants, such as dust and dirt, being drawn through the carburetor,
into the engine.
MAINTENANCE COVER
MAINTENANCE COVER
SCREW
AIR CLEANER BODY
AIR CLEANER COVER
AIR CLEANER
COVER SCREW
AIR CLEANER ELEMENTS
3. SPARK PLUG SERVICE
RECOMMENTDED SPARK PLUG: BOSCH R6 SUF
To ensure proper engine operation, the spark plug must be properly gapped and free of
deposits.
1. Remove the spark plug maintenance cover
2. Remove the spark plug cap.
3. Clean any dirt from around the spark plug base.
4. Use the wrench to remove the spark plug.
SPARK PLUG CAP
SPARK PLUG MAINTENANCE COVER
HANDLE BAR
PLUG WRENCH