Troubleshooting - Kipor SINEMASTER IG1000 Operation Manual

Hide thumbs Also See for SINEMASTER IG1000:
Table of Contents

Advertisement

11. TROUBLESHOOTING

Engine will not start:
Is there fuel in the tank?
Is the engine switch on?
Is the enough oil in the engine?
Is there a spark from
the spark plug?
WARNIN
G
■ Be sure there is no spilled
fuel around the spark plug.
Spilled fuel may ignite.
If the engine still does not
start, take the generator to an
authorized
dealer.
YES
YES
YES
NO
NO
Refuel the fuel tank
NO
Turn the engine switch on.
NO
Add the recommended oil.
Still
Replace the
no
spark plug.
spar
k
To
check:
1) Remove the spark plug cap and clean
any dirt from around the spark plug.
2) Remove the spark plug and install the
spark plug in the plug cap.
3) Set the plug side electrode on the cylinder
head to ground.
4) Pull the recoil starter, sparks should jump
across the gap.
40

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents