Troubleshooting; No Start - Kipor SINEMASTER IG6000 Owner's Manual

9. TROUBLESHOOTING

9.1 No Start

Is there fuel in the tank?
Is the engine switch on?
YES
Is the fuel valve on?
YES
Is the enough oil in the engine?
Is there a spark from
the spark plug?
Be sure there is no spilled
■
fuel around the spark plug.
Spilled fuel may ignite.
Is the fuel reaching the
carburetor?
If the engine still does not start, take
the generator to an authorized
KIPOR dealer.
YES
YES
NO
Replace the
spark plug.
NO
Refill the fuel tank.
NO
Turn the engine switch on.
NO
Turn the fuel valve on.
NO
Add the recommended oil.
Still no spark
To check:
1) Remove the spark plug cap and clean any
dirt from around the spark plug.
2) Remove the spark plug and install the spark
plug in the plug cap.
3) Set the plug side electrode on the cylinder
head to ground.
4) Crank the engine, sparks should jump across
the gap.
Clean the fuel filter cap.
To check:
1) Turn off the fuel valve and loosen the drain
screw.
2) Fuel should flow from the drain when the fuel
valve is turned on.
-26-
Take the generator to
an authorized KIPOR
dealer.