2.7.2 Refusing Incoming Calls (Do Not Disturb [DND])
You may set this feature during a meeting or when you are busy.
To set / cancel
PT / SLT
Off-hook.
T7436 / T7235
Off-hook.
•
A flashing CO button tells you an outside call is received. You can answer the call by
pressing the CO button.
•
While setting, you can temporarily cancel this feature by pressing the FWD/DND button.
Pressing the FWD/DND button alternates between setting or cancelling the mode.
•
You can set the "Do Not Disturb" and "Call Forwarding" features at the same time. However,
only one feature will work at a time. You can change the feature by pressing the FWD/DND
button while on-hook. Pressing the FWD/DND button changes the feature as follows:
DND
•
Specified extensions can override this setting and call DND extensions (Do Not Disturb
Override).
•
The FWD/DND button light shows the current status as follows (Default):
Off: Both features are not set.
Red on: DND mode
Flashing red: FWD mode
•
This feature also works for paging-group and an incoming call from a doorphone.
•
This feature is not available for an ISDN telephone user.
Customising Your Phone
•
4.1.3 Customising the Buttons
Create or re-arrange a FWD/DND button.
Operation
FWD/DND
OR
7
1
0
Press FWD/DND
or dial 710.
FWD/DND
Press FWD/DND.
Press "FWD/DND Cancel" to
cancel or "Do Not Disturb" to set.
FWD
OFF
2.7 Setting the Telephone According to Your Needs
1
Set
OR
0
Cancel
Dial 1 to set
or 0 to cancel.
Cancel
FWD/DND Cancel
Do Not Disturb
C.Tone
Set
C.Tone
On-hook.
On-hook.
95