Exiting Screens And Saving Changes; Exiting The Menu System - Intermec Trakker Antares 243X User Manual

Exiting Screens and Saving Changes

Exiting the Menu System

Trakker Antares 243X Handheld Terminal User's Manual
nugget
where hh is the two-digit hexadecimal number for the control
character or extended ASCII character. For example, to enter ETX as
a preamble, type:
\x03
To enter Ü (the 5250 Field Exit code) as the postamble, type:
\x9A
• To type an escape character (backslash) in the preamble or postamble
field, you must type two backslashes. The application ignores the first
backslash (\) character and saves the next characters. For example:
Enter These Preamble/Postamble
Characters Saved
\\ \
\\k \k
\ no data
5 Press the Enter key or choose OK to save your changes and exit the
screen.
For help exiting the menu system, see the next two sections, "Exiting
Screens and Saving Changes" and "Exiting the Menu System."
When you exit a screen, you can save or discard your changes:
Exiting Screens
Task
To exit a screen and save
the changes
To exit a screen and
discard the changes
1 Press the Esc key until you exit the TRAKKER Antares 2400 Menu
System. If you have made any changes to the current configuration, the
next screen prompts you to save the configuration parameters that are
currently enabled on the terminal to RAM.
39
Chapter 2— Configuring the Terminal
Description
Choose OK and press the Enter key. You can also press
the Enter key with the cursor positioned anywhere
except on the Cancel button.
Choose Cancel and press the Enter key. You can also
press the Esc key with the cursor in any field.
41