Delta; Saving Your Changes And Exiting The System Setting Screen - Intermec CK1 User Manual

• Transmit must parse
• Space separator

Delta

Delta is a discrete, variable length, and self-checking symbology.
You can configure the following options for Delta:
• Enable
• Check digit
• Send check digit
Saving Your Changes and Exiting the System Setting
Screen
This section explains how to save your changes in the System
Setting screen.
To save your changes and exit the System Setting screen
1 Make your changes in a screen, such as the Time screen.
2 Press Enter to return to the System Setting screen.
3 Make sure the Lock area does not have an L or a U in it.
If there is an L or U in the Lock area, press Lock to clear the
L or U.
4 Press S1-Esc to return to the Setup screen, and press S1-Esc
to return to the Main screen. Your changes are now saved to
memory.
To reject your changes and exit the System Setting screen
1 Make changes in a screen, such as the Time screen.
2 Make sure the Lock area does not have an L or a U in it.
CK1 Handheld Computer User's Manual
Lock area
Setting
Chapter 2 — Configuring the CK1
39