Intermec Trakker Antares 243X User Manual page 61

Trakker Antares 243X Handheld Terminal User's Manual
TCP/IP Direct Connect Network
In a TCP/IP network, the 2435 communicates with a host computer
directly using TCP/IP for the RF protocol.
UDP Plus or WTP Network
In a UDP Plus or WTP network, the 2435 communicates with a host
computer through the G4000. The G4000 translates UDP Plus and WTP
packets on the RF network into TCP/IP packets on the wired network and
vice versa.
TCP/IP
Direct Connect
Access
point
2435s
2435s in a TCP/IP direct connect network, UDP Plus network, or WTP network: In
each of these networks, the access point acts as a bridge to allow communications
between the wired network and the RF network.
Chapter 3— Operating the Terminal in a Network
Host
UDP Plus
or WTP
Ethernet
G4000
2435s
Access
point
47