Marking Check Boxes - Intermec Trakker Antares 243X User Manual

Marking Check Boxes

Trakker Antares 243X Handheld Terminal User's Manual
nugget
2 Edit the data in an entry field.
Keypad Do This
Use the a, b, n , or \ keys. You can also use the Delete
39-key or 57-key
(DEL) and Insert (INS) keys to edit an entry field.
Press the orange > key and E or F, or press _.
48-key
PRIMARY NETWORK
Activate:
Disabled
Host IP Addr:
0.0.0.0
Terminal IP Address:
0.0.0.0
OK CANCEL
243XU062.eps
Toggle and entry fields: For example, the Primary Network screen has toggle and
entry fields. The Activate field is a toggle field. Press b or press the orange > key and
F to toggle between Disabled and 802.11 DS or OpenAir. The Host IP Address and
Terminal IP Address fields are entry fields. You type a value into the field for each IP
address.
Screens may contain check boxes. Check boxes are used when you can
select more than one option at a time. To mark or clear check boxes, press
the Space key.
READER COMMAND MENU
[Space] to enable or
disable a command
[X] Abort Program
[X] Backlight
[X] Backspace
[X] Change Config
[X] Clear
[X] Default Config
[X] Delete File
[X] Enter Accum
[X] Exit Accum
[X] List Files
more
Marking check boxes: For example, press u or d or press the orange > key and A or
B to choose the Backspace check box and press the Space key to clear the check box.
The Backspace command is now disabled.
39
Chapter 2— Configuring the Terminal
[X] Multi-Read
[X] Receive File
[X] Rename File
[X] Reset
[X] Run Program
[X] Scanner On
[X] Scanner Off
[X] Test & Service
[X] Transmit File
OK CANCEL
243XU053.eps
39