Saving Configuration Changes - Intermec CK1 User Manual

2 Press
System Setting screen appears.
The System Setting Screen
Before you begin making configuration changes, see the next
section, "Saving Configuration Changes," to learn how to save
or discard configuration changes.

Saving Configuration Changes

After you make changes in a screen, the method you use to exit
that screen controls whether the changes are saved or discarded.
You cannot make changes in several screens and then decide to
save or discard the changes.
To save (or discard) your changes
1 After making configuration changes in a screen, make sure the
Lock area in the status bar is blank. If there is an L or U in
the Lock area, press Lock to clear the L or U.
2 Save or discard the changes you made in this screen:
• To save your changes, press Enter to return to the System
• To discard your changes, press S1 and then Esc to return
CK1 Handheld Computer User's Manual
to highlight the Setting icon, and press Enter. The
Setting
System Setting
Screen Power Buzzer
Time PPP Barcode
Keybo..
Lock area
Setting
Setting screen. (Your changes have been saved.)
to the System Setting screen.
Chapter 2 — Configuring the CK1
29