Configuring 802.1X Ttls Security - Intermec Trakker Antares 243X User Manual

Trakker Antares 243X Handheld Terminal User's Manual
BASEDATE.TXT is originally set to the release date of the most recent
version of firmware, however, it is now updated in these situations:
• When you download the latest version of firmware to your PC,
BASEDATE.TXT is updated to reflect the current time and date on
your PC.
• If BASEDATE.TXT is not loaded on your terminal, it will be created:
• when you download the latest version of firmware to your PC. It will
reflect the current time and date on your PC.
• when you set the current time and date on your terminal.
• If BASEDATE.TXT is loaded on your terminal, the BASEDATE.TXT
text is updated when you set the current time and date on your
terminal.

Configuring 802.1x TTLS Security

To use 802.1x TTLS security, you need:
• a PC with the Funk Odyssey™ server software version 1.1 or later. This
PC must also be configured with the current date and time, because the
server uses these values when it authenticates the terminal.
Note: You can also use a MobileLAN access point with software release
1.80 or later as an authentication server. For help, see the MobileLAN
access System Manual (P/N 067150).
• an Intermec MobileLAN access point with an 802.11b radio and
software release 1.80 or later that serves as an authenticator. The
authenticator knows the IP address and secret key of the authentication
server and translates EAP-TTLS frames to RADIUS frames and vice
versa.
• a Trakker Antares terminal. Your terminal must have an 802.11b radio,
the 802.1x TTLS security option (includes additional 4MB memory),
and firmware version 7.14 or later.
Note: The CACERT.PEM file on the terminal's C drive is used for
802.1x TTLS security. Do not delete this file from your terminal. If this
file is deleted, you will need to download the latest version of firmware to
your terminal. For help, see "Upgrading the Firmware" in Chapter 2 of the
2400 Family system manual.
To enable 802.1x TTLS security on the terminal
1 Make sure that:
• your Funk Odyssey authentication server and MobileLAN access
point are properly configured. For help, see the documentation for
your authentication server and MobileLAN access point.
Chapter 3— Operating the Terminal in a Network
59