Intermec Trakker Antares 243X User Manual page 50

Chapter 2— Configuring the Terminal
36
nugget
To access the TRAKKER Antares 2400 Menu System
• Press one of these key combinations:
Keypad Key Combination
l t 2 4 8
39-key
l x 2 4 8
57-key
the orange > key and then * 2 4 8
48-key
Or,
• Scan this bar code:
TRAKKER Antares 2400 Menu System
*..-.*
*..-.*
The Main Menu appears, displaying four menu options.
MAIN MENU
Configuration Menu
Diagnostics Menu
System Menu
About TRAKKER 2400
_` Select item
[Enter] Next screen
[F1] Help
[Esc] Exit
TRAKKER Antares 2400 Menu System
Menu Description
Configuration Choose this menu to configure bar code symbologies, network and
Menu
communications parameters, serial port parameters, and the
terminal's operating characteristics. In the Symbologies Menu,
active symbologies are noted with an asterisk (*).
Diagnostics Choose this menu to run hardware, software, or system diagnostics
Menu
to help analyze and fix problems. You can also view battery and
system information. For help, see Chapter 4, "Running
Diagnostics," in the 2400 Family system manual.
System Menu Choose this menu to manage files, load the default configuration,
set the time and date, store the terminal's configuration in flash
memory, and upgrade the firmware.
About Choose this option to see the part number, firmware version, radio,
TRAKKER RF protocol (UDP Plus, WTP, or TCP/IP), and security (WEP,
2400 802.1x TTLS, or 802.1x LEAP) that are loaded on the terminal.
You may need this information if you are working a problem with
an Intermec representative.
If you are using a DHCP server, this menu option also displays the
DHCP-assigned IP address.
39
243XU050.eps
Trakker Antares 243X Handheld Terminal User's Manual