Prefix/Suffix Code - CipherLab 1660 User Manual

1660 Barcode Scanner

5.3 PREFIX/SUFFIX CODE

By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured
to be suffix code. Up to 8 characters can be configured, for example, "Barcode_", and
you will have the string
"Barcode_1234567890".
If "BT HID" or "USB HID" is configured for interface,
then become applicable. You may decide whether or not to apply Key Status when
"Normal Key" is selected for Key Type. Refer to
Key Type
Scan Code Up to 4 scan code values are allowed.
Normal Key Up to 8 character strings are allowed.
Default setting
Configure Prefix
1) Read the label above to apply prefix code or suffix code separately, and follow steps
2~3. (Max. 8 characters each)
2) Read the "Hexadecimal
example, read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" label to complete this setting.
120
User Guide
appear in
Value" label on page 172 for the desired character string. For
front of the barcode
Key Type
Keyboard Wedge
Key Status
N/A
Add Shift
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Add Break
For example, read labels for [Add Shift],
[A], [Add Shift], and [B].
Enter Setup
read, like this
and Key Status
Table.
Configure Suffix
–
will