CipherLab 1660 User Manual page 18

1660 Barcode Scanner
Working Mode
Upon powering up, the 1660 scanner will try to establish a connection with 3610 or a computer
®
with Bluetooth wireless technology. Refer to
details. The connection between the scanners and 3610 is made easy and reliable.
Note: If USB Virtual COM or BT SPP is selected for output interface, the host can directly
send serial
HyperTerminal.exe and type the 6-digit command located under each setup label.
Refer to Appendix II Host Serial
6
User Guide
commands to configure
Commands.
Chapter 3 – Setting up a WPAN Connection
the scanner.
Enter Setup
For example, run
for