System Number Selection; Convert To Upc-A - CipherLab 1660 User Manual

1660 Barcode Scanner

4.19.1 SYSTEM NUMBER SELECTION

Decide whether to decode the ordinary UPC-E barcodes only or both UPC-E0 and UPC-E1
barcodes.
System number
System number
System Number 0 & 1
Warning: Because of the way system number 1 is encoded, if both system numbers
are enabled, the user might suffer from short scanning UPC-A or EAN-13
barcodes into UPC-E1 barcodes.

4.19.2 CONVERT TO UPC-A

Decide whether or not to expand the read UPC-E barcode into UPC-A.
If enable, the next processing will follow the parameters configured for UPC-A.
Convert UPC-E
to UPC-A
110
User Guide
enabled for decoding UPC-E0 barcodes.
0
enabled for decoding UPC-E1 barcodes.
1
* System Number 0
Only
*Do Not Convert
Enter Setup