Release Notes - CipherLab 1660 User Manual

RELEASE NOTES

Version Date
1.09 July 07, 2009
1.08 Apr. 29, 2009
1.07 Apr. 09, 2009
Notes
Modified: 1.1.2 Auto Power Off & Power-Saving — add setup label
for Power-Saving setting (101021)
Modified: 3.2.2 Configure Related Settings — Authentication
Modified: Appendix II Host Serial Commands
Modified: Using 3610 — change LED of Serial command mode
(Blue, flashing)
Modified: 1.1.2 Auto Power Off — change LED on/off ratio, etc.
Modified: 1.3 LED Indicator — change LED on/off ratio, etc.
Modified: 1.4 Beeper — add notification for PIN code, etc.
Modified: 3.1.1 Connect to 3610 — One beep for each setup label
Modified: 4.12.3 Code Length Qualification — MSI must include
checksum
Modified: 5.6.2 Activate the Concatenation of Barcodes — add
description of LED and beeper
Modified: Appendix I Firmware Upgrade
Modified: Appendix II Host Serial Commands
Modified: Appendix IV (Reject Random PIN Request)
New: BT Transponder (3610)
Modified: 1.2.1 Transmit Buffer — add setup labels
Modified: 1.4 Beeper — Transmit Buffer Disabled
Modified: 2.1 BT HID — change setup label (100006)
New: 2.3 USB HID via 3610 — add setup label (100005)
New: 2.4 USB Virtual COM via 3610 — add setup label (100004)
Modified: 3.2.2 Configure Related Settings — Use preset or
random PIN for authentication
Modified: 5.7 Removal of Special Character
Modified: Appendix IV — Use preset or random PIN
authentication
for