Key Status; User-Defined Scan Code - CipherLab 1660 User Manual

1660 Barcode Scanner User Guide
Scan Code

KEY STATUS

Decide whether or not to change key status when "Normal Key" is selected for Key Type.
Add Shift
Add Left Ctrl Add Right Ctrl
Add Left Alt Add Right Alt

USER-DEFINED SCAN CODE

1) Read the "Set Scan Code" label to define new scan code.
Set Scan Code
2) Read the "Hexadecimal Value" label on page 172 for the desired character string.
3) Read the "Validate" label to complete this setting.
4) Read the "Confirm" label to confirm the action.
Confirm
170
Enter Setup