CipherLab 1660 User Manual page 170

1660 Barcode Scanner
5) Run the download utility "ProgLoad.exe" on your computer.
1. For the communication settings, select "RS-232" and the correct COM port for USB
Virtual COM interface, and ignore the baud rate setting.
2. For the file option, click [Browse] to select the target file for firmware update —
Kernel (K*.shx) or user program (STD*.shx).
3. Click [OK].
6) After upgrading kernel, you will need to manually restart the scanner.
After upgrading the user program, the scanner will automatically restart itself once
the download is completed successfully.
Note: The output interface remains unchanged as specified in step 3 (= USB Virtual
COM).
158
User Guide
Enter Setup
Download
Enter Setup