Page 1
156X/166X B & LUETOOTH CANNERS HONES Please follow below instructions to establish a connection with your Apple device. Step 1: Scan below barcodes in number order. Please insure you hear the scanner beep each time you scan. When scanning keep at least 3 inches of gap between the scanner and the barcodes.
Page 2
Step 2: On your Apple device go to Settings / General / Bluetooth. Switch the Bluetooth ON by sliding the Bluetooth button to the right (see image below). Your Apple device will start searching for the scanner; at this point insure the scanner is awake by pressing its trigger and noticing the red light appear.
Need help?
Do you have a question about the 156 Series and is the answer not in the manual?
Questions and answers