Adding A Route {Route Add - Nomadix Access Gateways User Manual

A G
CCESS ATEWAY
1. From the Web Management Interface, click on
screen appears:
Click on
2. OK

Adding a Route {Route Add}

This procedure shows you how to add a route into the Access Gateway's routing table. This is
accomplished by establishing the route's destination IP address, and by setting the gateway or
router IP address by which the route's destination can be reached.
From the Web Management Interface, click on
1.
Routes screen appears:
Enter the
2. Destination IP/Prefix Length
table. This is the Destination IP or Subnet that the Route is trying to reach included with
the /prefix length to determine how large the subnet might be.
Enter the
3. Gateway IP
use to try to reach the destination IP/Subnet.
System Administration
to reboot the operating system.
address for the Route being added so that the NSE knows what to
System , then
, then
System
address of the route you want to add to the routing
Reboot. The Reboot Device
The Add Static
Route Add.
221