Nomadix Access Gateways User Manual page 114

You have the option of disabling PMS services by clicking on the
2.
radio button, then clicking on the
services you can exit this procedure, otherwise go to Step 3.
Select the
3. Type of PMS
choose the
Gateway's serial port)—you can choose only one of the listed options.
The pre-paid option requires hotel guests to "pre-pay" for services. The post-paid
option allows hotel guests to terminate their connection (via the ICC) and be
billed only for the actual time they are online. The NH proprietary PMS is offered
on a "post-paid" basis only.
If you choose HOBIC - RSI, you must select the

For Marriott, you can either choose Marriott or you can choose a type of WFB

interface (Post Only, Query and Post, or Name and Room).
If you choose Micros Fidelio (Post Only with TCP/IP), you must provide the

IP Address
If you choose Micros (1700/2000/3700/4700/8700 emulation) you must provide the

following additional information:




You also have the following check box options (see note):
Match Last Name Only

Skip First Char in Last Name

OnQ Compliant (Enable this option if you want to use Nomadix Micros POS

emulation to query & post to Hilton Corporation's OnQ PMS system).
102
(
Pre-paid
ASCII Serial Printer
and the
Target Port Number
Communications System Unit Number (1 - 64)
Communications System Name
Store Revenue Center Number: Internet Access
Store Revenue Center Number: Other
Submit button to save your choice. If you disable PMS
or ) you require from the available list, or
Post-paid
option (when a serial printer is connected to the Access
.
A
CCESS
PMS services disabled
Type of Access .
System Administration
G
ATEWAY
Target