Defining Subscriber Ui Buttons {Subscriber Buttons - Nomadix Access Gateways User Manual

Click on the
2.
Goodbye Page, as required.
If you enabled the IWS Goodbye Page, select your preferred display options by checking
3.
the corresponding boxes:
Display IP Address

Display Authen Type

Display Start Time

Display Stop Time

Display Byte Sent

Display Byte Received

Display Hypertext Link URL

If you enabled the Hypertext Link URL feature, enter the URL for the link in the
4.
Text Link URL
Define the following Field Label Definitions for your Goodbye Page:
5.
Session Summary

IP Address

Authen Type

Start Time

Stop Time

Byte Sent

Byte Received

Go To

If you enabled the Partner image for the Login UI, you will also see the same
image in the IWS Post Session page.
6. Click on the
button to reset all values to their previous state, or click on the
Reset
revert all values to their default state.

Defining Subscriber UI Buttons {Subscriber Buttons}

This procedure allows you to define how each of the control buttons are displayed to
subscribers.
200
Enable IWS Goodbye Page
field.
Submit button to save your changes. Alternatively, you can click on the
check box to enable (or disable) the IWS
A G
CCESS ATEWAY
Hyper
button to
Revert
System Administration