System Menu; Adding An Arp Table Entry {Arp Add - Nomadix Access Gateways User Manual

System Menu

Adding an ARP Table Entry {ARP Add}

ARP (Address Resolution Protocol) is used to dynamically bind a high level IP address to a
low level physical hardware (MAC) address. ARP is limited to a single physical network that
supports hardware broadcasting. This procedure shows you how to add an ARP table entry.
From the Web Management Interface, click on
1.
Table Entries screen appears:
Enter the
1. IP Address
Enter the
2. MAC Address
Define whether this entry is:
3.
 Static
Persistent

4. Define whether the interface that the device the ARP entry is connected to is:
Network

Subscriber 1

Subscriber 2

Click on the
5.
all the values to their previous state.
208
of the entry you are adding.
of the entry you are adding.
– Will only last until the next reboot
– Will be written to the current.txt file and loaded on each boot of the NSE
– WAN Interface
– LAN 1 Interface
– LAN 2 Interface
button to add your entry, or click on the
Add
, then
System ARP Add.
button if you want to reset
Reset
System Administration
A G
CCESS ATEWAY
The Add ARP