Enabling Mac Authentication {Mac Authentication - Nomadix Access Gateways User Manual

4. Check the
the NSE flash. Note: Not recommended.
5. Check the
the username in the Syslog.
6. Check the
Location
Port reported to the system by either VLAN or SNMP query. The Location
information is limited to 25 characters.
7. Check the
the 500
packet for each subscriber to the syslog system.
Click on the
to reset all the values to their previous state.
When logging is enabled, log files and error messages are sent to these servers for future
retrieval. To see sample reports, go to
AAA Log" on page

Enabling MAC Authentication {MAC Authentication}

1. From the Web Management Interface, click on
The MAC Authentication Settings screen appears:
Check the
2. MAC Authentication
functionality. The default setting is disabled.
3. Enter the retry frequency (in seconds) in the
wait time, in seconds, before reattempting MAC authentication following a failed attempt.
The minimum (and default) value is 10 seconds.
Select the
4. MAC Address Format
MAC address will be expressed in the RADIUS username and password attributes. The
96
Subscriber Tracking Log save to file
Include User Name Reporting
Port Location: Include Port Reporting
option to include the port information from the port location table and the
Include every 500th Packet
th
packet for each subscriber to be logged. Enabling this will send the 500
Submit button to save your changes, or click on the
263.
option to include the first 25 characters of
option to follow the Danish law that requires
"Sample SYSLOG Report" on page 264
Configuration
checkbox to enable the MAC-based authentication
Retry Frequency
. This setting is the format in which the subscriber's
A
CCESS
option to save the syslogs locally to
option and
Port Location: Include
Reset button if you want
, then MAC authentication.
field. This setting is the
System Administration
G
ATEWAY
th
and "Sample