Nomadix Access Gateways User Manual page 125

A G
CCESS ATEWAY
Fixed

3. Select the Default RADIUS Service Profile
4. Enter a Local Authentication Port
5. Select whether
authentication to override MAC authentication if necessary, and use the credentials of the
last login to succeed.
See Miscellaneous
Miscellaneous Options
In the "Miscellaneous Options" category, Enter a value for the time (in seconds) in the
1.
Default User Idle Timeout
before the subscriber's session times out and they must login again.
2. The Access Gateway can reauthenticate "repeat" subscribers who return to the system
within 720 hours. To enable this feature, click on the check box for
Subscriber Reauthentication
If you want to enable the URL redirection feature, click on the check box for
3.
Redirection
For a Network Access Server (NAS), if you want to send a NAS identifier with your
4.
account access request, click on the check box for
NAS identifier in the
5. To send the NAS IP address with your account request, click on the check box for
.
NAS IP
To send a NAS port type with your account request, click on the check box for
6.
Port type, then
To send the Framed IP address with your account request, click on the check box for
7.
Framed IP .
8. If required, check the box for
(to allow business policies that want to terminate the session at midnight of every day).
If required, check the box for
9.
transmitted and received byte count for a subscriber once an "accounting start" is sent).
This function prevents counting Walled Garden traffic if the billing plan is using bytes
sent/received as a charge criterion.
If required, check the box for
10.
specific subnet to a user).
If required, check the box for
11.
post session "goodbye" page). The "goodbye" page can be defined as a RADIUS VSA or
be driven by the Access Gateway's Internal Web Server (IWS).
System Administration
(for routing to predefined RADIUS servers)
Later Login Supersedes Previous
Options.
field. This value determines how much "idle" time elapses
.
.
NAS identifier
define the NAS port in the
Enable Session-Terminate-End-Of-Day When Authorized
Enable Byte Count Reset On Account Start
Enable RADIUS Subnet Attribute
Enable Goodbye URL
from the pull-down menu.
and a Local Accounting Port.
. This will alow a secondary form of
Send NAS identifier
field.
NAS Port Type
(if you want the system to display a
Enable Automatic
Enable URL
, then define the
field.
(to reset the
(if you want to allocate a
Send
Send NAS
Send
113