Nomadix Access Gateways User Manual page 80

configuration file (containing a listing of the individual configuration files and their
download frequency status) are downloaded from an FTP server into the flash of the
Nomadix device.
2. Defines the automated login into the centralized FTP server and the actual download
process into the flash.
The Auto-Configuration setup requires a few basic steps to be completed by both the field
engineer and the NOC administrator.
Administrative Steps to Enable Auto-Config
Typically, these tasks are performed either at a device pre-staging center or by the field
engineer.
1. Establish a WAN connection and electronically accept the EULA.
Setup RADIUS Server parameters (go to
2.
{Realm-Based Routing}" on page
Setup Username and Password for RADIUS Authentication.
3.
Administrative Steps to Enable Auto-Config for the NOC Administrator:
1. Add NAS IP address.
Add Nomadix Auto-Config VSA to the Nomadix dictionary file on the RADIUS server.
2.
3. Create a RADIUS profile with the configuration VSA.
4. Create an FTP server with the configuration files.
68
Step 1: RADIUS Authen Req/Response
message to determine location of meta
configuration file
Step 2: FTP download of configuration files
(secure)
"Defining the Realm-Based Routing Settings
118).
A G
CCESS ATEWAY
System Administration