Deleting All Port-Location Assignments {Delete All - Nomadix Access Gateways User Manual

A G
CCESS ATEWAY
Please note that while it is possible to set the value of a per-port configuration parameter
independently of the value of the corresponding global parameter, the feature itself is
disabled for a port unless both the per-port and global parameters are set to enabled. Thus:
RADIUS authentication for a port is enabled only if the RADIUS Client is globally

enabled AND the per-port enable RADIUS billing parameter is set.
Credit card billing for a port is enabled only if Credit Card Services is globally

enabled AND the per-port enable Credit Card billing parameter is set.
PMS billing for a port is enabled only if PMS Services is globally enabled AND the

per-port enable PMS billing parameter is set.
Tunneling for a port is enabled only if Tunneling is globally enabled AND the per-

port enable Tunneling parameter is set.
8. Click on the
the location file
to their previous state.
Updating a Port-Location Assignment
The procedure for updating a port-location assignment is similar to adding a port-location
assignment. The difference between the two procedures is how they are presented to you. For
example, if you already have port-locations assigned and you enter an existing "port" value,
each data field that you go through (port, location, state, and description) displays the value
currently assigned to the field.
To update a Port-Location assignment, simply update the fields with new values.
If you have updated a port-location assignment, you may want to change its
description to distinguish from the old assignment. Although the old assignment
will no longer exist in the system, a meaningful description can often be a
valuable quick reference guide.

Deleting All Port-Location Assignments {Delete All}

This procedure shows you how to delete all port-location assignments. The Access Gateway
displays a warning and prompts you to confirm this action before deleting all the port-locations
currently assigned in the system.
System Administration
Add button to save your changes (the message:
appears), or click on the
Entry added or updated in
button if you want to reset all the values
Reset
153