Nomadix Access Gateways User Manual page 138

The "Local hostname" field is also blank is this example which means that the NSE will
use the default value of "usg_lac" during tunnel negotiation.
Configure RADIUS Client
The NSE RADIUS client must be setup for realm-based routing mode since realm information
will be used by the NSE's L2TP tunnel feature to determine how to handle usernames that
contain realm information. The screen below shows an example of setting the routing mode to
handle realm-based usernames.
The Realm Routing Policy you just created is added to the list. That covers the main steps for
configuring an NSE to support L2TP tunneling.
126
Your new RADIUS Service Profiles are
added to the list.
Your new Realm Routing Policies are
added to the list.
A G
CCESS ATEWAY
System Administration