Nomadix Access Gateways User Manual page 97

A G
CCESS ATEWAY
Adding a New IPSec Security Policy
1. In the IPSec Security Policies
Tunnel Security Policy Settings screen opens.
Select the tunnel peer IP address for which you would like to add a security policy from
2.
the
Tunnel peer IP address
AH ; if the policy is a
3. In the Traffic Selectors
methods:
Select a specific protocol from the

Enter a specific protocol number in the

at www.iana.org/assignments/protocol-numbers.
System Administration
table, click the
menu. You must select a peer if the policy is using
Discard or Bypass
section, define a specific protocol by one of the following
Protocol
Add button to add an entry. The IPsec
policy, select none .
menu.
field. Protocol numbers are available
Protocol
or
ESP
85