Nomadix Access Gateways User Manual page 192

"Setting Up an X over Y Billing Plan" on page

Setting Up a "Normal" Billing Plan
If required, click on the
1.
Define a "label" for this billing plan in the
2.
Each plan must have a unique label, different from other plans.
Enter a description for this billing plan in the
3.
Define the
4.
week, and per month).
5. Define the
One time unit is assigned to each billing plan.
The Access Gateway allows you to define multiple billing plans with different time
units at the same time. For example, you can define one billing plan that changes
by the hour (e.g. $2.95 per hour) and a second plan that charges per day (e.g.
$12.95 per day).
Define the
6.
plan.
7. Define the DHCP Pool (public or private) -- see following note.
The "public" option requires IP Upsell to be turned on, otherwise subscribers
will receive private IP addresses.
Click on the
8.
Alternatively, you can click on the
or click on the
Click on the
9.
(previous) screen.
Repeat Steps 2 through 11 for each billing plan. You can enable (make active) any or all of
10.
the available billing plans.
180
Enable
schemes for this billing plan (rate per minute, per hour, per day, per
Pricing
Time Unit of the billable event (either Minute, Hour, Day, Week, or Month).
(to network) and
Up
button to save your changes and establish this billing plan.
Submit this Plan
button if you want to reset all the values to their previous state.
Reset
button at any time to return to the Internal Billing Options Setup
Back
check box to enable (make active) this billing plan.
field.
Label
Description of Service
(to subscribers) bandwidth range for this billing
Down
Delete this Plan
A
CCESS
181.
field.
button if you want to delete this plan,
System Administration
G
ATEWAY