Konica Minolta Bizhub 162 Service Manual page 253

7. Utility Mode
NOTE
Precautions for Changing the Setting of ADMIN. MANAGEMENT/REMOTE MONITOR
If the user machine setting has been changed from "LIMITED" to "FULL" or vice
versa while RSD (Remote Setup Diagnostic) communication is established, perform
the following operations:
• Temporarily disconnect the communication and re-execute "Remote Connect."
• Press the "Disconnect" key to disconnect the communication.
• The specific changes made in the setting of REMOTE MONITOR are not validated
unless the connection is made again.
< Precautions for Using the RSD (Remote Setup Diagnostic)>
• When a connection is established with a local machine using the RSD, the follow-
ing message appears on the Display and no operations can be made from the
"Control Panel" of the local machine. Neither the PC print nor Scanner function
can be accepted.
• No connection can be made with the RSD during operation from the "Control
Panel" of the local machine. Make the connection while no operations are per-
formed on the local machine.
• As is the case with the RSD, operations from the "Control Panel" of the local
machine, PC print, and Scanner function are not accepted while a connection is
being established with the local machine using the LSD (Local Setup Diagnostic)
and Page Scope Web Connection/Admin. mode.
• As is the case with the RSD, no connection can be made with LSD and Page Scope
Web Connection/Admin. mode during operation from the "Control Panel" of the
local machine. Make the connection while no operations are performed on the
local machine.
36
Field Service Ver. 1.0 Apr. 2005
4980P533AA
4980P534AA