Removal And Disassembly Of The Paper Take-Up Mechanical Clutch - Konica Minolta Bizhub 162 Service Manual

3. Other
12. Reinstall the Lower Cover, Upper Cover, and Lower Right Cover.
3.2.3

Removal and Disassembly of the Paper Take-up Mechanical Clutch

1. Remove the Multiple Bypass.
☞ 8
2. Remove the Lower Cover.
☞ 7
10
4687U060AA
4687D014AA
4687D015AC
4687D016AA
Field Service Ver. 1.0 Apr. 2005
10. Make the lever contact the gear
shaft.
11. Tighten the screw.
3. Remove four screws and the Feed
Roller Assy.
NOTE
• Use care not to lose the two
springs.
4. Remove the harness from the two
wiring saddles.
5. Remove one screw, unplug one con-
nector, and remove the solenoid.
NOTE
• Do not remove the flapper from the
solenoid.
6. Snap off one E-ring and remove the
Paper Take-up Mechanical Clutch.