Konica Minolta Bizhub 162 Service Manual page 282

Field Service Ver. 1.0 Apr. 2005
O. LOOP ADJUST (DUPLEX) *bizhub 180 / bizhub 210 Only
Functions • To adjust the length of the loop formed in the paper before the Synchronizing
Use • When a skew feed, fold, or misfeed of paper occurs
• When variations in the amount of void on the leading edge occurs
Adjustment • Refer to the option service manual (AD-504) for details.
Procedure
P. LOOP ADJUST (BYPASS)
Functions • To adjust the length of the loop formed in the paper before the Synchronizing
Use • When a skew feed, fold, or misfeed of paper occurs
• When variations in the amount of void on the leading edge occurs
Adjustment Setting Range
Specification -3.9 to 3.9 mm (1 step = 0.6 mm)
Adjustment Try a different setting value until there are no variations in the amount of void on
Instruction the leading edge, and paper skew, fold, or misfeed.
Adjustment 1. Enter Service's Choice in the Service mode.
Procedure 2. Select "LOOP ADJUST (BYPASS)" and press the [Yes] key.
3. Using [
4. Press the [Yes] key to validate the setting value selected in step 3.
Q. FLS PAPER SIZE
Functions • To select the paper size for FLS.
Use • When the FLS paper size has been changed
• Upon setup
Setting/Procedure • The default setting is "330
R. TX SPEED
Functions/Use • Transmit start speed setting. Choose the mode from among the following.
Setting/Procedure • The default setting is "V.34".
S. RX SPEED
Functions/Use • Reception start speed setting. Choose the mode from among the following.
Setting/Procedure • The default setting is "V.34".
Roller.
Roller when the Manual Bypass is used.
▲ ▼
/ ] key, select the desired setting value.
∗ ∗
330 203 "330 210"
"V.34" : 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800
V.17 : 14400, 12000, 9600, 7200
V.29 : 9600, 7200
V.27 : 4800, 2400
"V.34" : 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800
V.17 : 14400, 12000, 9600, 7200
V.29 : 9600, 7200
V.27 : 4800, 2400
∗
210" mm.
∗ ∗
330 216 330 220
8. Service Mode
∗
337 206 (mm)
65