Konica Minolta Bizhub 162 Service Manual page 260

Field Service Ver. 1.0 Apr. 2005
B. No. of RINGS
Functions/Use • This function can be used to set the number of rings between 1 and 16 until the
Setting/Procedure • The default setting is "2" (marketing area: standard).
• Depend on soft switch setting of marketing area.
NOTE
A fax to be received is canceled and the machine becomes unable to receive
it if the setting of "No. of RINGS" is made longer than the setting of "CNG
duration after dialing."
Be sure to make the "No. of RINGS" setting to a value shorter than the "CNG
duration after dialing" setting.
C. REDUCTION RX
Functions/Use • This function can be used to set whether documents longer than the paper are
Setting/Procedure • The default setting is "ON".
Reduction print mode
• It reduces (only the FD direction) and prints so that receiving data will in a recording
paper.
Recording
Footer Length of received image
paper size
OFF
A3
ON
call is answered.
1 : Once "2" : Twice
5 : 5 times 6 : 6 times
9 : 9 times 10 : 10 times
13 : 13 times 14 : 14 times
printed reduced ("ON"), split ("OFF"), or discarded ("CUT"). However, when
sending a document more than 24 mm (1 inch) longer than the paper, "CUT" is
not available. (In this case, the document is split.)
"ON" : Reduction print mode
OFF : 100 % RX mode
CUT : Cut mode
Less than 412 mm
413 mm to 458 mm
459 mm to 816 mm
817 mm to 1,220 mm
1,221 mm or more
Less than 408 mm
409 mm to 454 mm
455 mm to 808 mm
809 mm to 1,208 mm
1,209 mm or more
3 : 3 times
7 : 7 times
11 : 11 times
15 : 15 times
Printing
1 page with 100 %
1 page with (412 mm / image length)% reduction
Divide into 2 pages with 100 %
Divide into 3 pages with 100 %
Divide into 3 pages (or more) with 100 %
1 page with 100 %
1 page with (408 mm / image length)% reduction
Divide into 2 pages with 100 %
Divide into 3 pages with 100 %
Divide into 3 pages (or more) with 100 %
7. Utility Mode
4 : 4 times
8 : 8 times
12 : 12 times
16 : 16 times
43