Scanner Drive Cables - Konica Minolta Bizhub 162 Service Manual

6. Other
6.3.17

Scanner Drive Cables

A. Removal Procedure
1. Remove the Left Cover, Front Cover, Rear Cover, Upper Rear Cover, Right Rear Cover,
Original Glass, and Original Scanning Glass.
☞ 31
2. Loosen two screws (to which red paint has been applied) and remove the Scanner
Assy.
NOTE
• Loosen the two red painted screws to remove the Scanner Assy in this step, which
differs from the removal procedure for the Scanner Assy as a single unit.
46
4. Snap off one C-ring.
5. Loosen four screws and remove the
Scanner Motor harness from the
gear case assy.
4035D533AA
6. Remove two screws and the Scan-
ner Motor.
4035D534AA
Field Service Ver. 1.0 Apr. 2005
4035D086AC