Konica Minolta Bizhub 162 Service Manual page 266

All in one printer
Hide thumbs Also See for Bizhub 162:
Table of Contents

Advertisement

Field Service Ver. 1.0 Apr. 2005
G. FOOTER
Functions/Use
• This function can be used to set whether or not the reception information (RX
Setting/Procedure • The default setting is "OFF".
Attaching footer print:
When Footer is selected ON, it is printed at the end of printable area. 4 mm line area from
the end of printable area is kept for printing Footer. It should be attached on Footer area
regardless of image length. If the received image is divided into 2 pages or more, Footer is
printed in the specified location of all the recording sheets of paper printed.
Image data area:
The received image data is printed on the area except for 12 mm from recording paper size.
(No printable area: 8 mm (1/3 in) + Footer area: 4 mm (1/4 in)) The following table is the
image printable area of each recording paper size due to setting of Footer Print.
Paper length
A4 L
297 mm
A4 C
210 mm
Letter L
279 mm
Letter C
216 mm
Legal
356 mm
H. SELECT TRAY
Functions/Use
• This function can be used to select which paper tray can be used to supply
• This function is only available when an optional paper tray is installed.
Setting/Procedure • The default setting is "Enable".
• A non-equipped cassette is not displayed.
I.
CLOSED NETWORK
Functions/Use
• This function can be used to set whether or not the fax is received if the sender's
Setting/Procedure • The default setting is "OFF".
data and time, RX management number, RX page number, Transmitter's ID) is
printed at the bottom of each received document.
ON
: Add footer
"OFF" : No footer
Footer off
Image data area
289 mm
202 mm
271 mm
208 mm
348 mm
paper when printing received documents or transmission reports. (A paper tray
that cannot be used for supplying paper can also be specified.)
Tray1 : "Enable"
Tray2 : "Enable"
When setting value is determined, reception setting of utility menu is indicated.
This setting has effect on RX print and Report print.
fax number does not match the fax number programmed in this machine's one-
touch dial keys.
ON
: Enable closed network reception
"OFF" : Disable closed network reception
Image data area
285 mm
198 mm
267 mm
204 mm
344 mm
Disable
Disable
7. Utility Mode
Footer on
Footer area
+4 mm
+4 mm
+4 mm
+4 mm
+4 mm
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bizhub 210Bizhub 162

Table of Contents