Konica Minolta Bizhub 162 Service Manual page 248

Field Service Ver. 1.0 Apr. 2005
D. DENSITY (ADF)
Functions/Use • To set the reading image density level when the Automatic Document Feeder is
NOTE
The low image density is set as the default value to prevent a dirty copy from
being produced.
Setting/Procedure • The default setting is "MODE1".
E. DENSITY (BOOK)
Functions/Use • To set the reading image density level when the Original Glass is used.
Setting/Procedure • The default setting is "MODE1".
F. PRINT DENSITY
Functions/Use • To set the print density.
Setting/Procedure • The default setting is "0".
G. LCD CONTRAST
Functions/Use • To set the brightness of the LCD display.
Setting/Procedure • The default setting is "0".
H. LANGUAGE
Functions/Use • To select the language displayed on the control panel.
Setting/Procedure • Select the desired language and touch [OK] to set the language.
I. BUZZER VOLUME
Functions/Use • This function can be used to set the volume of alarms and the beep sounded
Setting/Procedure • The default setting is "LOW".
used.
"MODE 1" : To lower the image density to prevent a dirty copy from being
produced.
MODE 2 : To produce a copy having an image density equivalent to that
of the original.
"MODE 1" : To produce a copy having an image density equivalent to that
of the original.
MODE 2 : To lower the image density to prevent a dirty copy from being
produced.
"0" Setting range : -2 (LIGHT) to +2 (DARK)
"0" Setting range : -1 (LIGHT) to +2 (DARK)
when a key is pressed.
HIGHT "LOW" OFF
7. Utility Mode
31